1024 mail realy in per sec

get-help
1

I want to relay mails upto 1500k in 1 sec, please guide me how can I achieve that, below is the shaping.toml I am using to rout the mail to exampl.com.

["exampl.com".sources."asdadad"]
#connection_limit = 30
#max_ready = 3000
#max_message_rate = "150/s"
#max_connection_rate = "100/s"
smtp_port = 587
enable_tls = 'Required'
smtp_auth_plain_username = 'sadsada'
smtp_auth_plain_password = { key_data = 'adsasdadad' }


["default"]
connection_limit = 20
max_connection_rate = "20/s"
#max_deliveries_per_connection = 1024
max_message_rate = "200/s"
idle_timeout = "60s"
enable_tls = "Opportunistic"
consecutive_connection_failures_before_delay = 100
2

Hey there @youthful-zorse, while we would like to respond to every question raised here, the frequency and nature of your questions are far beyond what we at Kumo Corp can support without financial support from your organization.

You may continue to ask questions in the hope that someone from the broader community will help, but you should expect that Kumo Corp will not spend any time beyond a cursory glance to see if your questions are well-qualified and can be easily dealt with.

3

@yearning-hyena sorry, for asking you again, but if possible can you help me out achieve relay.

4

@youthful-zorse there are many factors involved in that calculation. The CPU, RAM, and IOPS will have just as much if not more effect than the throtting settings. This week in testing I was able to get an AWS C5.4xlarge to process 8000/second. The exact same configuration on a t2.small was only able to hit 300/second.

You have not provided enough information to give any realistic answer, but in general you should have as much CPU, RAM, and IOPS as possible.

I have mentioned this before, but will say it again - your project can benefit from a paid PS consultation where we can help you more specifically to get you to a successful deployment sooner with less stress.

5

I am using an instance type c5a.2xlarge, IOPs 6000 and throughout 250

6

moreover to that I am using the above configuration shared with you

7

@faithful-ostrich to be precise I have done all the configuration for production deployment, now I am facing the issue with the mail sending others things I have achieved.
If possible, can you please share with me the configuration you are using that I can understand what I am doing wrong